The main processes of a whole rice milling plant include cleaning, husking, separating, whitening, polishing, grading, color sorting, packing & weighting.

In order to get high output, we need to follow the following guidance from several aspects, such as milling at the right moisture content, pre-cleaning paddy before husking, using a paddy separator, considering two-stage whitening, grading the milled rice, monitoring and replacing spare parts regularly.

A moisture content of 14% is ideal for milling. If the moisture content is too low, high grain breakage will occur, resulting in low head rice rate.

The easy wear spare parts include screen, emery roller, rubber roller, plastic bucket, polisher roller and screw impeller.

We can recycle the rice husk into pellets or briquettes for home or commercial use.

Yes, we promise a quality guarantee for one year.

We provide reliable and timely after-sale service to meet the demands of our clients.

The MNML rice milling machine’s electric current is controlled by adjusting lead weight, under normal conditions, the electric current is not more than 60A of the 37kw of the main motor. In the normal milling effect state, the rice bran will bluish yellow color which contains less starchy endosperm and high rice milled rate.
When the rice milled effect is not perfect, which accounts for internal and external pressure insufficient, please adjust clearance between rice blades and emery roller.
If the condition of rice whitening is too high, please increase clearance. During debugging, please note: the electric current must guarantee the electric current is ideal 60A to 70A.

1. The reasons for this phenomenon is classified in various types, but the main problems lie on the following explanations:
2. The discharging hole was set too much pressure.
3. The quantities of sparing water is a little less.
4. The polishing roller and bar screen was torn and wore too critical.
4. Please adjust according to relative reasons.

There are many factors to influence sorting effects, the followings are can be referred:
Material, such as rate of bran content, heterochrome particles content and heterochrome particle types including the moldy kernel, immature particles, and heterogeneity grain
Equipment, feeding material state (speed or thickness), the shape of channels (U, V), the quality of air(no oil, no water, no dust and drier)
Operational factors, the main factor is the quantity of flow controlled vibration amplitude of feeder
Workmanship factors, the sorting should be set before polishing and after grading progress